Have you ever heard of a cake breaker? Me neither. A few weeks ago I was walking down the kitchenware aisle at our local thrift store, and a giant fork happened to catch my eye. I picked it up because I originally thought that I could make a wool comb out of it.
No one quite knew what it was intended for. (we thought it was for holding meat down while its being cut) After some time on Replacements.com, we found out that this utensil is specifically used for angel food cake. Its supposed to be really good at cutting the cake without squishing it. Who knew?
I decided to make a hackle out of it, so I ordered another off of Amazon to make a 2 pitch hackle.
The other cake breaker is here:http://www.amazon.com/Animewild-R-M-Cake-Breaker/dp/B000FRUNXM/ref=sr_1_1?ie=UTF8&qid=1408905724&sr=8-1&keywords=cake+breaker
The supplies I used are here:
- Mahogany Wood, or any hard wood
- Cake Breaker
- Liquid Epoxy
- Wipe-on Polyurethane
- Power Sander
I measured a groove about half an inch wide and a little less than that deep. I used a chisel to cut the groove.
I used a saw to cut off the heads of my 2 cake breakers (one was sterling silver!)
Than we used liquid epoxy to set the metal heads in the groove. It got a little messy, but sanded off nicely after it dried.
We used a bulk epoxy that we had originally used for another project, but I think a small tube of 2-part liquid epoxy would work. Those small epoxy packs can be found at hardware stores or auto parts stores.
Here’s the epoxy I’m talking about: http://www.amazon.com/Gorilla-Glue-4200101-Epoxy/dp/B001Z3C3AG/ref=pd_sim_sbs_indust_6?ie=UTF8&refRID=13KRHAC7D1Y4XZ13RM7M
Then I applied 2 coats of a wipe on polyurethane finish, and taadaa! A hackle!
I am going to make another one, 12 inches long. The tines on this one are about 4 inches wide, and while it works, I really need more room to make roving that is long enough to be useful for spinning. My experiment cost under $10 to make as I had most of the supplies on hand and I got the satisfaction and enjoyment out of coming up with idea to make something and having it work!
2 thoughts on “DIY Hackle”
You are so ingenious, Rebekah!
I remember the cake breaker!