Felted Pumpkins

Just in time for fall!  We went to Rhinebeck’s Sheep and Wool Festival and saw lots of felted pumpkins.  We chose some roving and went to work!

I used scrap wool to felt the basic shape of the pumpkins, and then covered that with the beautiful orange variegated merino wool to create the ribs of the pumpkins.

all three alternate, pumpkins, felted pumpkins, orange wool, variegated merino, orange wool
big one closeup
little closeup           middle

meema setup

I wrapped wool around pipe cleaners and felted it a little to keep its shape, and then wound the wool-covered pipe cleaner around my finger to make the tendrils.

God bless, Rebekah

Advertisements

More bunny pics, ect

The babies are going to be 3 weeks old tomorrow!

rabbit baby, baby bunniesThey’ve started hopping up on top of the nestbox.

day 20
day 20 2

Today I set the twist in some yarns, which means I soaked most of them in very hot water until the fibers plumped up, and then drained the water out and set them to dry.

silk yarn, green sheep wool,

For overspun yarns, instead of soaking it in hot water, I steam it for 20 minutes, and then weight it to dry. That helps to reduce the amount of  kinkiness in the yarn.

Here’s my makeshift stretcher.

makeshift yarn stretcherThe bucket has sand in it to provide the weight.

BABIES!

This morning Chloe started pulling fur, and when I went back out to feed the bunnies 2 hours later, lo and behold, she had kindled!

I have literally been waiting for this litter (my first) for over a year, so I’m super excited. This is the 3rd breeding, the first two failed, which was disappointing.

When I went out to check on her there was a stillborn kit on top of the nest 😦 I thought that was all, but I has still happy that she had kindled. When I went back after taking care of the kit, I moved the fur around and I saw 2 live, healthy babies in the way back of the nest! After making myself wait for about 20 minutes I went back and took the nestbox out of the cage to take a good look. One more healthy baby was in the corner.

3 healthy babies!!!!!!
Yay!


angora rabbit babies, rabbit litter, newborn rabbitsLook at those tiny ears!

black tort, french angora rabbit

Chloe, first time momma.

rabbit nestbox, metal nestbox

 

I will be posting photos as regularly as I can to show these little guys grow up!

God Bless!
Rebekah

 

My Own Angora Yarn

I’m doing a spinning contest, so I needed to take the yarn off my spindle so I could start spinning the new yarn, a cotton/angora blend.
There’s not very much yarn on the spindle to it’s a mini-skein.

spindle

I made myself a quick skeiner stick to wind the yarn on.

niddy noddy
winding on nn
wound yarn

Now to make the angora yarn bloom, you are supposed to “full” the yarn (soak the yarn in several changes of very hot and cold water while mashing and agitating the yarn.)
I used a potato masher.

mashing yarn

The next step is to whack the damp yarn on a hard surface to make the angora bloom. I did not take pictures of this step.

finished yarn 1I didn’t really need to do this whole process for such a small skein, but I wanted to try it. It’s my first yarn from my own angora, after all!

Shearing – The Experiment

I decided to try shearing Andre this year with electric clippers instead of scissors. The clippers I used are actually dog clippers, and really old, from the 1960s. We picked them up for about $5 at a thrift store just to experiment with electric shearing. Good deal too, especially because I’ve read that a good pair of clippers for Angoras can cost upwards of $300.

_MG_9425

 

I set myself up a nice little shearing station in the bunny yard. I used 2 sawhorses (the perfect height) with a metal shelf left over from the shelf that supports the breeder cages on top. I wrapped a towel around the shelf to keep the bunnies from slipping all over it. I also used a metal tray that fit the saw horses to keep all my equipment in.

_MG_9293

 

The supplies I used:

  • Various combs and brushes
  • Oil for the clippers
  • Bacitracin ointment (in case I nipped him)
  • Scissors
  • Bag to hold the sheared fiber
  • Paper towel

 

I started by brushing him out and then began slowly shearing him across the back and shoulders. Its nice to have 2 containers for the fiber – one for the sheared fiber, and one for the prime fiber that comes out on the brush.
Andre was a little restless, but overall did quite well with the noise and experience of the electric clippers. Chloe, on the other hand, hated the clippers and tried to get away from them by climbing on me. I guess it depends of the temperment of the rabbit!

_MG_9302

I never cut him with the clippers, but there was a few close shaves. He had some really big matts on his shoulders that the clippers had a hard time getting through, so I had to use the scissors on those. That is the only way I’ve cut him – with the scissors when I can’t see the skin.
It helps when shearing to hold the fiber at a 90 degree angle from the body (straight up) so the clipper blades can go straight into the fiber.  Also, according to the directions that came with the clippers, you are supposed to dip the entire clipper blade while running into a “light kerosene – oil mixture”  throughout the shearing operation. I don’t have kerosene, so I just lubricated the blades with an all purpose motor oil and wiped off the excess on a paper towel whenever the bunny needed a break.

 

It’s kinda fun when a big matt or nice chunk of fiber comes off.

_MG_9300

He had some really big matts that I had been kind of dreading to do on his neck and chest. For those, I have to have him on his back to do, and being upside down with a noisy machine thing on his neck would be way too scary for a prey animal.
I ended up doing those carefully with scissors.

I also should say that I did not do this all in one day. I worked on sections of him over about 2 weeks. Of course it doesn’t have to take that long. More experience on my part and less matts on his part would have sped up the operation.

Before:

_MG_9298During :

_MG_9404

After:

_MG_9428

On a side note, Chloe’s due date came and went, still no babies. No nesting this time either. Rebred June 29, so new due date is July 30th. If nothing happens then, I might start seriously looking for a new buck.

Thanks for reading!

God bless,
Rebekah

 

Hedgepig

My latest felt project is a cute little hedgehog. Or hedgepig, which I like the sound of.  Hedgepig. Say it with me, Hedgepig! front view I intended to make an owl, but when I had made the body shape and covered the back with dark brown wool, I looked at him, and it just clicked that he looked like a hedgehog. So I made him into a hedgehog.  He is about 2.5 inches tall.     side hedge hog, hedgehog photo, felted hedge hog He is a more cartoon-y style than I usually do. He is in the same style as a penguin I did last year, and those are the only 2 I’ve done in that style. I’ll be doing a post with pictures of that penguin soon! Thanks for reading! God bless, Rebekah