The Results of 1 lb of Merino!… and the Escapee

All the way back in September I was given a huge ball of green Merino wool to spin. It’s taken me 2 months to finish it, but it was a good learning experience.

tweed yarn, hand spun tweed yarn, green tweed, merino yarn, merino wool
Tweed Merino 3-Ply HangingI did 3 skeins of true 3-ply, (my first) using my new Lazy Kate. I learned that to create a nice defined 3-ply I should hold each single at an angle from all the others. I did 2 skeins of Navajo Plied yarn, (also my first) and figured out that I either over-spun or over-plied it, because while all 3 skeins of 3-ply were balanced, both of my Navajo plied skeins were unbalanced.

I also did my second attempt at corespinning with this wool. This time my corespinning turned out much better than the first attempt.  I tried this time to spin it thinner, so therefore it wouldn’t be as chunky and get caught in the orifice.

I got around 550 – 600 yards out of this, not counting the 30 or so yards of corespun.

corespun yarn, hand made corespun yarn

Free Range Bunnies

 Steffy (Stefano) has escaped from his cage three times and has been found wandering around the yard! At first I thought I had left his cage door open by accident, but the third time he escaped I had just groomed him and put him back in his cage, so I knew I had fastened the latch right!  I watched him for a minute and figured out that the little bugger had been biting the wire of the cage door and shaking it as hard as he could. If he did it for long enough the latch would come unhooked, and then, bunny freedom! I soon fixed that!

Well, thanks for reading! God Bless, Rebekah

Advertisements

DIY Hackle

Have you ever heard of a cake breaker? Me neither. A few weeks ago I was walking down the kitchenware aisle at our local thrift store, and a giant fork happened to catch my eye. I picked it up because I originally thought that I could make a wool comb out of it.

cake breaker

No one quite knew what it was intended for. (we thought it was for holding meat down while its being cut) After some time on Replacements.com, we found out that this utensil is specifically used for angel food cake. Its supposed to be really good at cutting the cake without squishing it. Who knew?

I decided to make a hackle out of it, so I ordered another off of Amazon to make a 2 pitch hackle.
The other cake breaker is here:http://www.amazon.com/Animewild-R-M-Cake-Breaker/dp/B000FRUNXM/ref=sr_1_1?ie=UTF8&qid=1408905724&sr=8-1&keywords=cake+breaker

The supplies I used are here:

supplies

  • Mahogany Wood, or any hard wood
  • Cake Breaker
  • Liquid Epoxy
  • Chisels
  • Wipe-on Polyurethane
  • Power Sander

I measured a groove about half an inch wide and a little less than that deep. I used a chisel to cut the groove.

I used a saw to cut off the heads of my 2 cake breakers (one was sterling silver!)

Than we used liquid epoxy to set the metal heads in the groove. It got a little messy, but sanded off nicely after it dried.
We used a bulk epoxy that we had originally used for another project, but I think a small tube of 2-part liquid epoxy would work. Those small epoxy packs can be found at hardware stores or auto parts stores.

Here’s the epoxy I’m talking about: http://www.amazon.com/Gorilla-Glue-4200101-Epoxy/dp/B001Z3C3AG/ref=pd_sim_sbs_indust_6?ie=UTF8&refRID=13KRHAC7D1Y4XZ13RM7M

epoxy unsanded
epoxy sanded

Then I applied 2 coats of a wipe on polyurethane finish, and taadaa! A hackle!

finished outdoor  top white
finished white

I am going to make another one, 12 inches long. The tines on this one are about 4 inches wide, and while it works, I really need more room to make roving that is long enough to be useful for spinning. My experiment cost under $10 to make as I had most of the supplies on hand and I got the satisfaction and enjoyment out of coming up with idea to make something and having it work!

Let the spinning begin!!

  Because…. I now have a spinning wheel!
It’s great. My first ever wheel is an Ashford Kiwi, a very nice beginners wheel. I love how fast it is! This afternoon I spun an entire bobbin full of yarn. That same amount of yarn would have taken me days to do on the drop spindle. We bought this wheel at half price at a tiny yarn shop the next town over, an excellent deal. While we were there we picked up a beautiful braid of Blue Faced Liecester fiber, which the lady at the shop recommended for a beginning spinner.

spinning wheel, ashfordIt’s a double treadle wheel, which I like because it feels more balanced than a single treadle. It’s also in the upright “castle” style I like.

yarn I love this fiber, it’s a joy to spin.

I’m excited to try different styles of spinning and plying with this wheel, and later on if I want to spin bulky art yarn, Ashford makes a jumbo bobbin and flyer attachment.
I’m off to go spin yarn for hours and hours!! 🙂

God bless, Rebekah.